68, no - 67 Camaro SS350 - finishing touches done!!!

by **Dundee Denny** » Sun Dec 29, 2013 5:53 pm

Boyz see a lot of 69 Camaro's but not to many 68's.

Snaptite 1.32 kit which will be powered by a Pioneer motor and chassis.

Just getting towed back to the shop after its first round of primer.

Boyz will add it to the T/A stock out back.

Dundee Denny

by **Dundee Denny** » Sun Dec 29, 2013 5:54 pm

by **Dundee Denny** » Sun Dec 29, 2013 5:56 pm

by **TuscoTodd** » Sun Dec 29, 2013 6:26 pm

Sweet deal!!!
Looking forward to seeing what the Boyz have up their sleeves for this one! :D

by **HRWJim** » Sun Dec 29, 2013 7:49 pm

I have one of those , Is it on a Pioneer Mustang chassis? That what I did but have yet to finish. Maybe you will motivate me to complete mine. Look forward to the progress. Jim

by **Dundee Denny** » Sun Dec 29, 2013 9:10 pm

Hey Jim!
Yep on the Mustang Pioneer chassis. Had to shorten the front axle and do some minor trimming of the chassis, but near a perfect fit!!

Trying to use just the Pioneer combo to keep parity with all the cars. In most cases one tenth - two tenth difference which could be the driver maybe.......

Boyz just mixed up some Tamiya gray green and planning on painting still tonight.

Dundee Denny

by **dge467** » Sun Dec 29, 2013 9:23 pm

You and the Boyz are keeping busy! Looking forward to your build as usual!

by **TuscoTodd** » Sun Dec 29, 2013 9:24 pm

WOW! The Boyz don't mess around! :D

by **BRP32** » Mon Dec 30, 2013 10:00 am

Looking good Denny!

I can't wait to see it finished!

Here is a pic of mine I built below.

Wayne (Bolton's Speed Shop) :D :D :D

by **Dundee Denny** » Mon Dec 30, 2013 9:00 pm

The Boyz finally got the first coat of paint on.

They are going with Tamiya light gray green and dark gray green.

The darker color will go on tonight!

Dundee Denny

by **Dundee Denny** » Mon Dec 30, 2013 9:01 pm

by **HomeRacingWorld** » Mon Dec 30, 2013 9:11 pm

Looking good...time to tap a keg and sit back awhile :)

by **TuscoTodd** » Mon Dec 30, 2013 9:22 pm

Lookin' pretty mean! :D

by **Dundee Denny** » Mon Dec 30, 2013 10:00 pm

Wayne, thanks for showin yours! Would be honored to have them racing a tDundee Speedway anytime!!
Wrestling with the front spoiler, going to pass on the rear spoiler.

Think the Boyz are heading more to your gold #9.

Feel free to show us your 68 too!!!

Fun is seeing all the variety of ideas out there!!

Dundee Denny

by **Dundee Denny** » Tue Dec 31, 2013 9:57 pm

I have to keep the Boyz from reading your posts!!

They took Harry's suggestion as a command and due to tapping that keg, only tonight have we finished the paint job on the Camaro!!

Dundee Denny

68, no - 67 Camaro SS350 - finishing touches done!!!

68, no - 67 Camaro SS350 - finishing touches done!!!

Re: 68 Camaro SS350

Re: 68 Camaro SS350

Re: 68 Camaro SS350

Re: 68 Camaro SS350

Re: 68 Camaro SS350

Re: 68 Camaro SS350

Re: 68 Camaro SS350

Re: 68 Camaro SS350

Re: 68 Camaro SS350

Re: 68 Camaro SS350

Re: 68 Camaro SS350 - first phase of paint on

Re: 68 Camaro SS350 - first phase of paint on

Re: 68 Camaro SS350 - first phase of paint on

Re: 68 Camaro SS350 - first phase of paint on

Who is online