Home Racing World

Please delete, photo hosting service lost

On the electronic Goldmine motors, what is the ROM rating at 12 volts, and the number of teeth on the pinion?

crossovercrazy, The 1/43 scale guy's are familiar with that motor referred to as G9330 motor, they seem to run them at 9V. The motor has a 10t pinion and at 12V is rated 38,000 RPM from what I found searching in the 1/43 section.

Is this the motor marked "MH417A" in the pictures?

Yes, I got these in a motor lot and to be truthful I'm unfamiliar with 1/43 scale. I did find a description for MH417A motors showing them as 19,000 RPM at 6V. One motor in my photo at the top right is marked MM413A, this one I acquired from someone to try out at some point. On the Electronic Goldmine page the motor shown in their graphic is marked MJ413A, I can only assume these are different lot or run numbers but expect the motors to be the same spec. Maybe someone from the 1/43 group can help us both out.

6V, 15ohm Controller (IIRC). HANG On when you pull the trigger. :lol:

Randy

To the top once for reduced pricing.

I will take the Slot Car Heroes motors, please send me your PayPal info.

Thanks