Home Racing World

Jon

What's the best way to replace worn out paper on the sanding blocks?

What grade would you use for PG Urethanes?

Sorry if these are answered elsewhere

Thanks

Ed

I use 1500 to 2000 fine for PG urethanes. You can use double sided Scotch tape if you cannot find or want to buy the larger types.

I buy self-stick (peel 'em and stick 'em), disks and cut them up to fit.

any automotive wet dry sand paper is best, I been using 1500 grit and have had very good results

thin double sided tape, carpet tape and look at a scrapbooking store, they have some good thin double sided tape

hope this helps

You guys must be at the truer along time. I use 180 drywall screen and more times than not it still takes me at least an hour to cut em even. I always have 1/2 the tire barely touching and the other half cutting away.

In fact I'm doin a set now where only half the tire is sanding. Takes awhile. This is actually the norm for me, very rarely do I put a set on and it sands even.

Dave

Thanks everybody for the great info..


What grit come's on the Razor originally? - that has worked well for me so far -it's just getting a bit worn.

Ed