Page 1 of 1
Re: Easy way to tin your soldering iron
Posted:
Wed Sep 16, 2015 6:12 pmby chappy
Great tip Dave.
Thanks for posting, very timely for me too.
Bob
Re: Easy way to tin your soldering iron
Posted:
Wed Sep 16, 2015 6:28 pmby Audi1
Timely for me, too. Does he wrap the entire tip of the iron with solder and then let it melt on? What diameter solder does he use, 0.15, 0.22............? Does he use any flux in the iron tip before wrapping with the solder (couldn't get that from the start of the video, although it might have been there.........). Thanks.
Allan
Re: Easy way to tin your soldering iron
Posted:
Wed Sep 16, 2015 7:25 pmby Gentleman Norb
I want that 3 minutes of my life back!
Re: Easy way to tin your soldering iron
Posted:
Wed Sep 16, 2015 7:34 pmby HomeRacingWorld
:) Well...I just did it. On my new iron that I have used. Now I have kept it clean by using the copper pad.
Worked great! Even on the larger iron that Doc and I bought at the same time that has been used. Cleaned, wrapped, heat and serve :)
Thanks Dave!
Re: Easy way to tin your soldering iron
Posted:
Thu Sep 17, 2015 10:21 amby dreinecke
Good stuff, and that's how I did mine.
Re: Easy way to tin your soldering iron
Posted:
Thu Sep 17, 2015 10:55 amby Z-carfan
Great timing for me too, just received my soldering in the mail. Hakko FX888D.
I did some test soldering last night, I am assuming that I can still use this technique even though the iron has been used once?
Z-carfan
Re: Easy way to tin your soldering iron
Posted:
Thu Sep 17, 2015 10:56 amby HomeRacingWorld
Yep, just clean it beforehand. I did both of mine last night and they were both used a few times.
Re: Easy way to tin your soldering iron
Posted:
Thu Sep 17, 2015 11:13 amby Z-carfan
Sounds good, thanks guys. This weekend should be fun now! :)