Home Built Chassis Gluing Jig
Posted: Mon Mar 16, 2015 9:25 pmHome Racing World
Your Slot Car Home On the Net!
http://www.homeracingworld.us/
Home Built Chassis Gluing Jig
Page 1 of 1
Posted: Mon Mar 16, 2015 9:25 pmRe: Home Built Chassis Gluing Jig
Posted: Mon Mar 16, 2015 10:31 pmExcellent Mike, thanks for this.
Re: Home Built Chassis Gluing Jig
Posted: Tue Mar 17, 2015 1:17 amThat is a great way of doing it ... J Y D
Re: Home Built Chassis Gluing Jig
Posted: Tue Mar 17, 2015 3:34 amThat's a great idea Mike, I should do this too. As many of these as I have used, and will use, It would be a big help. Thanks for sharing this idea.
Bob
Bob
Re: Home Built Chassis Gluing Jig
Posted: Tue Mar 17, 2015 7:11 amWhen I shorten or lengthen these chassis, I typically do it as a one off. This means I am juggling two or three pieces of wood, brass & clamps at one time while praying that I get everything lined up OK, the wheelbase right and not twisted like a pretzel. This jig takes care of 99% of that. I am doing a lot of Revogram Grand Sport chassis too for my front motor series. I think a similar jig but with a deeper dropped section down the center will work for them too.
Re: Home Built Chassis Gluing Jig
Posted: Tue Mar 17, 2015 8:21 amExcellent post, Mike. I will archive this for future reference.
Thanks,
Rick V.
Thanks,
Rick V.
Re: Home Built Chassis Gluing Jig
Posted: Tue Mar 17, 2015 12:18 pm