Page 1 of 2
68, no - 67 Camaro SS350 - finishing touches done!!!
Posted:
Sun Dec 29, 2013 5:53 pmby Dundee Denny
Boyz see a lot of 69 Camaro's but not to many 68's.
Snaptite 1.32 kit which will be powered by a Pioneer motor and chassis.
Just getting towed back to the shop after its first round of primer.
Boyz will add it to the T/A stock out back.
Dundee Denny
Re: 68 Camaro SS350
Posted:
Sun Dec 29, 2013 5:54 pmby Dundee Denny
Re: 68 Camaro SS350
Posted:
Sun Dec 29, 2013 5:56 pmby Dundee Denny
Re: 68 Camaro SS350
Posted:
Sun Dec 29, 2013 6:26 pmby TuscoTodd
Sweet deal!!!
Looking forward to seeing what the Boyz have up their sleeves for this one! :D
Re: 68 Camaro SS350
Posted:
Sun Dec 29, 2013 7:49 pmby HRWJim
I have one of those , Is it on a Pioneer Mustang chassis? That what I did but have yet to finish. Maybe you will motivate me to complete mine. Look forward to the progress. Jim
Re: 68 Camaro SS350
Posted:
Sun Dec 29, 2013 9:10 pmby Dundee Denny
Hey Jim!
Yep on the Mustang Pioneer chassis. Had to shorten the front axle and do some minor trimming of the chassis, but near a perfect fit!!
Trying to use just the Pioneer combo to keep parity with all the cars. In most cases one tenth - two tenth difference which could be the driver maybe.......
Boyz just mixed up some Tamiya gray green and planning on painting still tonight.
Dundee Denny
Re: 68 Camaro SS350
Posted:
Sun Dec 29, 2013 9:23 pmby dge467
You and the Boyz are keeping busy! Looking forward to your build as usual!
Re: 68 Camaro SS350
Posted:
Sun Dec 29, 2013 9:24 pmby TuscoTodd
WOW! The Boyz don't mess around! :D
Re: 68 Camaro SS350
Posted:
Mon Dec 30, 2013 10:00 amby BRP32
Looking good Denny!
I can't wait to see it finished!
Here is a pic of mine I built below.
Wayne (Bolton's Speed Shop) :D :D :D
Re: 68 Camaro SS350
Posted:
Mon Dec 30, 2013 9:00 pmby Dundee Denny
The Boyz finally got the first coat of paint on.
They are going with Tamiya light gray green and dark gray green.
The darker color will go on tonight!
Dundee Denny
Re: 68 Camaro SS350
Posted:
Mon Dec 30, 2013 9:01 pmby Dundee Denny
Re: 68 Camaro SS350 - first phase of paint on
Posted:
Mon Dec 30, 2013 9:11 pmby HomeRacingWorld
Looking good...time to tap a keg and sit back awhile :)
Re: 68 Camaro SS350 - first phase of paint on
Posted:
Mon Dec 30, 2013 9:22 pmby TuscoTodd
Lookin' pretty mean! :D
Re: 68 Camaro SS350 - first phase of paint on
Posted:
Mon Dec 30, 2013 10:00 pmby Dundee Denny
Wayne, thanks for showin yours! Would be honored to have them racing a tDundee Speedway anytime!!
Wrestling with the front spoiler, going to pass on the rear spoiler.
Think the Boyz are heading more to your gold #9.
Feel free to show us your 68 too!!!
Fun is seeing all the variety of ideas out there!!
Dundee Denny
Re: 68 Camaro SS350 - first phase of paint on
Posted:
Tue Dec 31, 2013 9:57 pmby Dundee Denny
I have to keep the Boyz from reading your posts!!
They took Harry's suggestion as a command and due to tapping that keg, only tonight have we finished the paint job on the Camaro!!
Dundee Denny
