I started with a beat up styrene chassis left from the Parts-Box proxy of spring 2014.
I replaced the Hawk motor with a Piranha to make sure it would be overpowered & added a few new brass rods.
It had some old Parma foam tires on it, I smeared 2 coats of urethane over the rears, then trued on my Razor.
It made for some pretty hefty meats on the rear.
I had no inserts to fit the hubs so I used some computer printed ones glued to a foam plug.
I had some old printed bead locks in the drawer, so they're glued to the tires also.
![Image](https://s26.postimg.cc/y6vl5mz5l/t-bird-1.jpg)
I had some pretty rough resin slosh castings I found on E-Bay for $10.
It took me & the Dremel most of an afternoon to clean out the inside To make it mostly usable.
Since it could never be salvaged as a complete body, I cut it up in a few pieces & reassembled it as a mod.
Painted with bright gold enamel as a primer & covered that with blue metalic Dupli-Color.
Liberated the decals from an AMT Nascar Thunderbird.
...............Ready for battle.........................
![Image](https://s26.postimg.cc/ca9259lyx/t-bird-2.jpg)
![Image](https://s26.postimg.cc/y85iz20zd/t-bird-3.jpg)
![Image](https://s26.postimg.cc/w651kt309/t-bird-4.jpg)