![Image](http://i.imgur.com/8TJwBQf.jpg)
Got back to working on the Super Mod this morning. Cut a hole for some injectors in the hood.
Centered the injectors and traced around the out side. Then flipped them over and traced
around the stack portion to get a guide line. With the body on the frame for support, drilled
some holes to open up the hood.
![Image](http://i.imgur.com/rvTeQcR.jpg)
After some file work and some test fitting, wound up with a hole that the stacks would fit through
and left the bottom of the stacks to mount under the hood.
![Image](http://i.imgur.com/W9Qyvt8.jpg)
Now we have a set of injectors that just stick through the hood, but not higher than the little cowl
piece in front of the cock pit. A nice peaceful morning with coffee and the radio.
All for now
Kevin