So much going on, this got away from me.
But progress. Pin out time.
Wheel wells were sanded out and shaped to be even as possible. Pinning out the body over the aligned wheels/axles allows me to adjust the sanding where it is needed.
I used a small section of plastic sign material as a base to set the ride height. This will be how the body should be mounted when completed.
Anyway, finished sanding the openings. Also sanded to molding trim off the sides and door handles. Looks more like a veteran Sportsman body now. At least to my eyes.
Wet sand, clear seal, and wet sand once more and its ready for the silicone.
On Tapatalk Pro