by valie » Mon Mar 06, 2017 8:27 am
Hi Dan,
I’ve got the Kremer Porsche with an anglewinder setup. It runs on a totally adjustable chassis, although it being a little brittle when handled too aggressively. The fronts are independent stub axles which are adjustable by three grub screws per axle. The motor pod can be set for float and can take any long can motor. To set it up properly takes a little patience, but once there, then the fun starts.
To answer your question; the chassis is as good as any Slot.it anglewinder with good grip, depending on the tyres. A good balance does not harm your pride!
Regards,
Gert