by Ralphthe3rd » Thu Jul 24, 2014 10:18 am
One Caveat I want to mention, and this is NOT Meant to Dis The Dash Chassis or Arms - as they are very Nice arms....BUT, there is a Caveat. As a precaution, when you get a Dash Chassis(complete) or just the arm, do yourself a favor, and wipe on a small drop of CA(Super Glue) over the windings of the arm, to keep the wires in Place ! As recently, I've noticed the windings aren't as tight as first thought, and I've experienced loose wires tending to be thrown to the outside of the laminate with extended high RPM use. This is also a problem with JL/AW arms too, so it's best to CA those windings as well. Amazingly though, I've (personally) never experienced this problem with old Aurora Arms, even the 6 ohm Hi-Perf arms found in Wild Ones, Tuff Ones and the early A/FX chassis.
PS- to RichD, have you noticed any thrown windings in any of YOUR Dash Chassis or Test Arms yet ? I noted this problem on every Dash Arm I've used for extended periods, and they came from both early and later batches. :(