Pix & Specs

[F1Fan]

aaah, thanks Scott!, 5 bonus points for you!

Kidding aside, thanks for doing this.

Chris

[indidragracer]

Cool cars and some nice setups. But i am a little confused, you have separate motorpods and then you tape it to the chassi. Why is that?

[Smokeio]

[Cgyracer]

Here is the link to the initial Round 0 and tech along with the video.

viewtopic.php?f=35&t=19634&p=228364&hilit=Group+5#p228364

Rob

[BARC 1]

THnaks for including us. My device does not like the other website, and I have almost given up following anything over there.

I like the concept being used for this race, and that qualifying your car at the start of the series is part of the procedure. I think I will give this a try next year. I would welcome the challenge, and if the car submitted DNQ then I will try harder the following year

[F1Fan]

Here is an end of season body off video of the top 10 cars, plus a few others.

[GAS41T]

Wow
I’ll never use tungsten putty again .... LESSON LEARNT

[Camber]

The complete detail of my cars build is available on SCI here:

http://www.slotcarillustrated.com/porta ... ild-thread

To clarify a few points:
I used NSR Supergrip tyres
NSR air rims (no sponge or anything inside)
I used a cheap $10.00 SRP 30K motor

Won't be using Scaleauto guides anymore, I have broken quite a few over the years and should have known better. A modified JP green guide will be used from now on, they are absolutely bullet proof and provide a slight upward angle which is generally an advantage.

Any other questions shoot away...

[SuperSlab]

[Kevan]