2019 TransAm Proxy - Rules and Registration

[Audi1]

That's a good plan!

Allan

[CARacing]

Thanx Allan...more time to prep!!!

[Doubl-B]

Allan:
I didn't see it listed. OK to glue and true tires?
thx.
BB

[Audi1]

Bob - absolutely!

Allan

[Audi1]

Which screen name goes with Dave Holmes?

Allan

[4424ever]

Sorry about that I was about to send you a message when I saw this post
The PP issues for me must be solved if you finally receive my payment
I canceled the initial payment and resent it. Hope we’re all good :o

[redlynr]

[Audi1]

Yes, thanks for the pick-up; FK-180 long cans are legal for this proxy (correction made in the Rules section).

Allan

[4424ever]

The Colgate motor is listed in Robert Livingston’s specs as Legal but the can is not easily identifiable is it considered ok for the proxy :text-thankyouyellow:

[Audi1]

If the Colgate motor is either an SC-130 or FK-180 and has a manufacturer's spec of 21,500 rpm or lower, then it qualifies. We don't base eligibility on the specs given in Robert Livingston's New Motor List. Here's what the Rules say: "if the motor is MANUFACTURER RATED at or below 21.5k RPM - it qualifies for this proxy."

Allan

[Kevan]

They're all made in China anyway and a digital tacho only costs $10 shipped.

[DRW21]

Hi Allan, would it be possible to amend the rim width rule?
The only reason would be to allow more glue on the greater surface area of the rim and tire if the rim is allowed to be 10mm not the 8.5mm seen how 11mm wide tires are permitted.
I don't see it as a performance gain as there would be more rotating mass, just less chance of tires coming loose.
Cheers - Dave.

[Audi1]

Hi Dave, Those are the same wheel and tire rules that we had for the ill-fated 2018 Trans-Am Proxy series and since a lot of this year's entries will be based on the 2018 cars, we can't make that change. I do understand the request, but we can't accommodate it this time around.

Allan

[DRW21]

Thanks for that Allan, no worries Mate, looking forward to this one too.
I'll be running a Scaley '70 Camaro, number is yet to be sorted, I'll keep ya posted asap.
Cheers Guys

[Aloha]

Allan
May I pls change entry from #3 to #7
Thank you
Aloha
Dale