Body type.

[Rastas]

[attachment=0]IMG_20190524_185046.jpg[/attachment][attachment=1]IMG_20190524_184903.jpg[/attachment]Can any one tell me what brand this body is and what type of chassis it would of had?

[olskoolslotz]

It's a Revell Lotus 23 that would have used the aluminum 1/32 scale adjustable ladder chassis. The glue in rear body mount is missing, looks like it may have been there at one time.

[Rastas]

OK thanks for the replays, if its a revell were they a set car or a RTR car?

[olskoolslotz]

Sometimes photos just work better. Your body is a kit body.

Kit body is shown on the left in both photos, notice extra details aft of driver and rollbar on kit body in top view.

Bottom view shows the different body mount locations used from kit body to set-rtr body.

[Rastas]

Thank you for the information, I'm going to build a scratch chassis for it. Being a small car I'll be able to run it on my scaly track. Now I'm wondering what it running mate was I'll need to find one of them ?

[olskoolslotz]

[n9949y]

A different set up using an old Lloyd Asbury- Lancer body to do a '65 Lotus 23/Porsche,
inspired by George Follmer's winning 1965 USRRC U-2 Championship.









A bit of a struggle to fit around a Parma 16D motor a True Scale vacuum form body into
a scale appearing low driver position. A Russskit '60's era head w/Bell helmet.

[mattb]

Great looking builds. Any pictures of the whole track?

[n9949y]

[mattb]

Didn't realize this was pelican Park!