Home Racing World

A member just asked what an H&R chassis is so I thought I’d post this for him and maybe some newer members here:
A 1/24-25 scale adjustable chassis that is excellent for using with 1/24-25 scale model cars, resin bodies or whatever type body you want to use. You can use many type of motors, gears, tires, wheel, etc. combinations on this and can be purchased from many of our suppliers here on our forum.
This is just H&R Racing site to see what’s out there:
http://www.hnrracing.com/

Thank you very much, I felt a bit useless not knowing and appreciate your time. It looks like an excellent site.
I had seen the reference come up a few times and wondered if it was to do with Home Racing World..
Thank you for taking the time. :)

Does anyone know if there's a Paul Gage tire for the hr chassis wheels? I think these are 27 mm tall so a little les wouldn't hurt either....I can't tell on the chart because they list 1/24 by car brand...xpgs would be nice

There are on ebay for sure. I searched for Paul Gage 1/24 H&R and found some. There are several sizes on his 1/24 urethane tires.

Or on SCC web site there are a list of the 1/24 tires they carry.

https://www.slotcarcorner.com/Paul-Gage ... -H-R-c339/

You will want to check your current rims and see if you have the ribbed or ribless wheels and your dimensions width and height to order the proper tires.

Thankyou....now if I can tell if it's a wide rib or narrow I'd know.. maybe wide rib tire would fit both?

Thanks Harry

Thanks Harry, helps for me for future.

You can buy H&R chassis with silicone tires and you won't need to look for aftermarket tires.

I have the wheels on another project...so I wondered...I gotta find out which rib this is..narrow or wide

Thankyou....they're wide ribbed rears for sure....now I'll get the right one from pg cuz its lower....thanks again.