Can-Am Proxy 2018 round #6 Edmonton

Can-Am Proxy 2018 round #6 Edmonton

Postby Radarek » Sat Sep 22, 2018 3:06 pm

Hello Guys

Cars arrived safely, all been checked and qualifications have been run. What a great bunch of cars, some new faces are stepping up to the game, at least new to me, some old baddies too. All cars performed great, off course some are faster, some are slower but that doesn’t change the fact that I had great fun qualifying them. Qualm was done on our usual blue lane at 11.5 volts. 10 laps was given to each car or more if it kept improving. Tires were cleaned with tape.

#23/6.242
#65/6.274
#2/6.520
#10/6.526
#70/6.539
#3/6.558
#91/6.597
#22/6.610
#5/6.653
#4/6.729
#80/6.748
#1/6.818
#192/6.842
#32/6.848
#12/6.919
#30/6.942
#16/6.943
#9/6.963
#21/7.038
#99/7.055
#11/7.109
#13/7.152
#17/7.160
#51/7.164
#20/7.2
#61/7.216
#31/7.27
#66/7.328
#7/7.388
#8/7.472
#28/7.483
#25/7.669
#6/7.722
#47/7.780
#19/7.799

Thunderslot Lola’s are the one to beat, absolutely great car -all of them.
Race should be done beginning of this coming week. More info to come.

Best regards
Radarek :banana-dance:
Radarek
HRW SlotCar Veteran!
 
Posts: 458
Joined: Sat Sep 10, 2016 6:00 pm

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby Rleog » Sun Sep 23, 2018 8:10 am

Thanks for the qualification results.

Can you provide a little information about your track? Like many others, I'm curious to see how the race unfolds.
Rleog
HRW SlotCar Veteran!
 
Posts: 562
Joined: Mon Dec 17, 2012 6:43 am
Location: Middleton, MA

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby Mark » Wed Sep 26, 2018 6:35 am

Thanks for the good qualifying run for #91!

Looking forward to the race.
Mark
 
Posts: 86
Joined: Wed Dec 11, 2013 8:56 am
Location: Woodstock, GA

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby Radarek » Fri Oct 05, 2018 3:42 pm

Guys

We have run the race. More info to come tomorrow morning. ..
Radarek
HRW SlotCar Veteran!
 
Posts: 458
Joined: Sat Sep 10, 2016 6:00 pm

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby Billy boy » Fri Oct 05, 2018 4:28 pm

Awesome! :text-thankyouyellow: :text-bravo:
Billy boy
HRW SlotCar Veteran!
 
Posts: 185
Joined: Tue Jun 16, 2015 6:57 pm
Location: Framingham,mass

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby Billy boy » Sun Oct 07, 2018 6:19 am

Any race results to post?
Billy boy
HRW SlotCar Veteran!
 
Posts: 185
Joined: Tue Jun 16, 2015 6:57 pm
Location: Framingham,mass

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby Radarek » Sun Oct 07, 2018 10:33 am

Hello

First a bit of info about the track.
80 feet on red lane, our longest lane, mdf with chalkboard paint, copper braid, separate power sources with regulated voltage, for this race we have set it to 10.7 volts for more drivability and in some cases we have better laps then during qualification. For drivers stood during race: Pat, Kirby, Robert and Paul, for Robert that was truly race of his own as after recovering from some serious health problem standing up and race all 35 cars is a great achievement. Plus he had the least number of deslots too. We had one single problem during race when front wheel came off of Barc’s car, besides that no problem. I have sent some pictures to Allan to post. I will attach spreadsheet in few minutes...
Last edited by Radarek on Sun Oct 07, 2018 9:48 pm, edited 1 time in total.
Radarek
HRW SlotCar Veteran!
 
Posts: 458
Joined: Sat Sep 10, 2016 6:00 pm

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby Radarek » Sun Oct 07, 2018 10:40 am

Results attached

Congratulations to podiumites ..

If you scroll to the right you can see what was the best lap times for each car for each lane. #23 took the lead on every lane... great car to drive.
All the cars where pleasure to drive.
Last edited by Radarek on Sun Oct 07, 2018 4:44 pm, edited 1 time in total.
Radarek
HRW SlotCar Veteran!
 
Posts: 458
Joined: Sat Sep 10, 2016 6:00 pm

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby SuperSlab » Sun Oct 07, 2018 12:16 pm

Not sure if I am the only one but I cannot open the file.
User avatar
SuperSlab
HRW SlotCar Veteran!
 
Posts: 687
Joined: Wed Sep 05, 2012 6:27 pm
Location: Richmond, BC, Canada

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby Slot GT » Sun Oct 07, 2018 3:30 pm

I can't open it either.
User avatar
Slot GT
HRW SlotCar Veteran!
 
Posts: 189
Joined: Fri Apr 01, 2016 1:59 am
Location: Edmonton, Alberta

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby bov » Sun Oct 07, 2018 5:16 pm

Hi Darius,

Thanks for that - happy with 9th in this field.....

Interesting reading in that spreadsheet - many thanks to all involved in putting on the round - congrats to the Podiumites.....

On to the next round, lets "Rock and Roll"..... :lol:
User avatar
bov
HRW SlotCar Veteran!
 
Posts: 127
Joined: Sat Apr 22, 2017 2:07 am
Location: Carlingford, Sydney - Australia

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby Slot GT » Sun Oct 07, 2018 9:42 pm

I have to say it was a pleasure running these cars. Very fun!
User avatar
Slot GT
HRW SlotCar Veteran!
 
Posts: 189
Joined: Fri Apr 01, 2016 1:59 am
Location: Edmonton, Alberta

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby SuperSlab » Sun Oct 07, 2018 9:56 pm

Wow, it looks like Dale and I were locked in a battle to the finish! Identical results in every lane: I am assuming he gets the higher position due to better Q time?

Thanks very much for running the round guys. Looks like my #80 has sort of settled in to the just-better-than 10th slot....

Cheers

Alwyn
User avatar
SuperSlab
HRW SlotCar Veteran!
 
Posts: 687
Joined: Wed Sep 05, 2012 6:27 pm
Location: Richmond, BC, Canada

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby Radarek » Sun Oct 07, 2018 10:59 pm

Alwyn

I will try to get results spreadsheet working. If there was a tie then average lap was a tie breaker after that fastets lap
Radarek
HRW SlotCar Veteran!
 
Posts: 458
Joined: Sat Sep 10, 2016 6:00 pm

Re: Can-Am Proxy 2018 round #6 Edmonton

Postby Aloha » Sun Oct 07, 2018 11:40 pm

Alwyn
I am in very good company with you my friend....
Aloha
Dale
Aloha
HRW SlotCar Veteran!
 
Posts: 396
Joined: Sat Jan 03, 2015 4:45 pm

Next

Return to MRollingThunder Can-Am Proxy 2018



Who is online

Users browsing this forum: No registered users and 34 guests