This ones gonna be a music wire and brass build...probably a flat pan type for an Lmp open class etc. so the parts list
.063 music wire
2x6 .032 sheet
Brass tubing
Motor bracket and tongue thing
I'll fit it with an HR motor or piranha...HR for the build.
Extra parts car underway
Forum rules
Open to ALL SCALES!
1. Pictures of your starting materials. Choice of body, Chassis type and material (brass, plastic etc.)
2. Pictures of the tools you will be using, and any alternative ways to do the same thing. for example, tubing bender versus bent around a screwdriver handle. etc.
3. List where parts come from, or where they can be purchased from, or if they are homemade.
4. As many pictures of the build during the whole process as you can.
Open to ALL SCALES!
1. Pictures of your starting materials. Choice of body, Chassis type and material (brass, plastic etc.)
2. Pictures of the tools you will be using, and any alternative ways to do the same thing. for example, tubing bender versus bent around a screwdriver handle. etc.
3. List where parts come from, or where they can be purchased from, or if they are homemade.
4. As many pictures of the build during the whole process as you can.
9 posts
• Page 1 of 1
Extra parts car underway
by Racie35 » Sun Jan 22, 2017 7:39 pm
Last edited by Racie35 on Mon Jan 23, 2017 1:55 pm, edited 1 time in total.
- Racie35
- HRW SlotCar Veteran!
- Posts: 626
- Joined: Fri Jan 23, 2015 9:10 am
Re: Extra parts car underway
by bill from nh » Sun Jan 22, 2017 8:28 pm
You have a good selection of parts. Which H&R motor are you trying? The 18K RPM Hawk?
- bill from nh
- HRW SlotCar Veteran!
- Posts: 373
- Joined: Wed Sep 05, 2012 5:32 pm
- Location: New Boston, NH
Re: Extra parts car underway
by Racie35 » Sun Jan 22, 2017 8:42 pm
I'll try the 18,000 first, then maybe a piranha. Here's a few parts bent up....mockup
- Racie35
- HRW SlotCar Veteran!
- Posts: 626
- Joined: Fri Jan 23, 2015 9:10 am
Re: Extra parts car underway
by Racie35 » Sun Jan 22, 2017 8:44 pm
I had planned on doing one with a slot it pod,but Doug a fellow club member here pointed me towards these easy to use parts so I may do both.
- Racie35
- HRW SlotCar Veteran!
- Posts: 626
- Joined: Fri Jan 23, 2015 9:10 am
Re: Extra parts car underway
by CrockettNZ » Sun Jan 22, 2017 10:30 pm
looks good
will be watching this one
will be watching this one
-
CrockettNZ - HRW SlotCar Veteran!
- Posts: 475
- Joined: Sat Oct 17, 2015 2:11 pm
- Location: Napier New Zealand
Re: Extra parts car underway
by Racie35 » Mon Jan 23, 2017 1:57 pm
Still cannot figure out where best to put the guide flag in relation to the front axle. Lots of my cars are different.
- Racie35
- HRW SlotCar Veteran!
- Posts: 626
- Joined: Fri Jan 23, 2015 9:10 am
Re: Extra parts car underway
by gascarnut » Mon Jan 23, 2017 3:36 pm
-
gascarnut - HRW SlotCar Veteran!
- Posts: 611
- Joined: Thu Sep 06, 2012 6:35 pm
- Location: Irvine California
Re: Extra parts car underway
by chappy » Mon Jan 23, 2017 5:53 pm
Looking like a nice build sir, and imagree wirth Dennis as for guide placement
Keep the pics coming , i like what i see so far
Bob
Keep the pics coming , i like what i see so far
Bob
-
chappy - Minister of Slot Racing
- Posts: 2926
- Joined: Fri Sep 28, 2012 5:22 pm
- Location: Ontario Canada
Re: Extra parts car underway
by Racie35 » Mon Jan 23, 2017 5:59 pm
Ok..thanks on the guide tip gentlemen...I hope your shoulder gets well fast Chappy.
- Racie35
- HRW SlotCar Veteran!
- Posts: 626
- Joined: Fri Jan 23, 2015 9:10 am
9 posts
• Page 1 of 1
Return to HRW All Scales Build-OFF!
Who is online
Users browsing this forum: No registered users and 7 guests
Powered by phpBB® Forum Software © phpBB Group