Well you should have one by now sir :)
Been too long since I had some time to build. Lame excuses abound, but finally back to it.
Just some shots of the chassis in progress. JK Bracket, brass and some piano wire is all.
Ran the wire inside the brass tubing and bent it up for added front axle support.
Made some "shaker" pans or sort of. They slide over the frame tubing (one size up) and do allow a little float.
The bottom plate and rod set the front to back motion. Since I am just experimenting, I cut the plate just a shy short so I threw in a rod.
Guide mount and side tunes for wire routing.
All done and painted with Duplicolor Gun Metal.
To be continued ;)