Need track hosts!

[dreinecke]

Looking for track hosts in the USA and Canada.

Please contact me if interested!

[Radarek]

Hi there.

Edmonton .Alberta. Canada.


As requested before u would like to host one round.
We have here two tracks right now.
First one is 76 feet 4 lane routed mdf with copper braids. Flat.
We hosted some proxies 8n the past and will be a host for this next year group 5 north America.
Second track is 90 feet 3 lane routed mdf with copper foil. 4 feet elevation change. Please take a look on the picture. Also some more tracks available in the future as there in more or less stadium of build.

[Austin]

I would love to host a race. The track Riverside 1966 being built now.

[Audi1]

Is this for the TransAm proxy? If it is, then we could host again this year at The River Run in Merrimac, MA.

Allan

[Brumos RSR]

Oh how the IMp loves straights!!!

[nhdungeonracer]

As I said in the other post, I can host on a 5 lane oval, and also have access to a 3 lane roadcourse.

With Audi1 and Austin, that would be 4 races alone in the NE of USA :D

[gascarnut]

PMCC is available again as well.

[yebo]

Hi I was reading your post and would like to be host for one of the races if I can.
My track is in Kelowna Canada BC,My club mate Rob and I have hosted the Group 5 proxies here before as well as the Canadian proxy,my track is a 3 lane wood track at 70ft.We race rubber and urethane on our cars.
I would like to enter a car to,not sure what yet.
I would like to add that the track can be viewed on youtube"Canalami Raceway",Group 5 and Canadian proxy

Lez

[Retro Racer 44]

I'm sure I can twist Luf's arm into hosting a round on the Targa (touch, touch) if I do all the organizing. With other Canadian races it will save a whole lot of border crossing.

Keith

[heli_ca]

Hi,

How can I get an idea of how many tracks are urethane versus rubber tire based?
I run both types of tire, just want to select the tire that is best for the majority of tracks.

[chappy]

Hi Heli im pretty sure the rules are all urethane so the choice is easy.
But i have been known to be wrong before. I recall Sept 6 1967 i made a mistake lol.
Just have a peak in the rules thread to be sure.
Bob

[dreinecke]

Ok folks! We have 10 total races planned. We will shake up things a bit this year and run north of the border. This means we will have to drop a few tracks unfortunately unless folks want the cars gone 12+ months. For the 2016 proxy, we ended the year slightly over budget with shipping. I'm going to change a few things this year to make that easier:

1) As the PDR will bookend the event, I'll ship the cars in a protected container that is smaller than the boxes we used this year. Then, we can ship them back home from the PDR in their original shipping boxes.

2) Several folks have offered to get them between tracks - that should save some cash and hopefully allow for prizes since I couldn't get those with going out of pocket last year.

Here is the current list of hosts/tracks:

dreinecke - Palmer Divide Raceway
Audi1 - The River Run
Austin - Riverside 1966
nhdungeonracer - Unknown Track Name (We would like to use the Road Course!)
Luf - Targa
Yebo - Canalami Raceway
Radarek - Unknown Track Name
Chappy - The Lake on the Mountain
Gascarnut - Pebblestone Model Car Circuit
dreinecke - Palmer Divide Raceway

I still need folks' addresses, phone numbers, emails, etc. So, HOSTS - Please send me that information.

Also, if you have a track pic and specs, I'd like that too.

Thanks!

[Cgyracer]

[Audi1]

Hi David, The River Run (2nd Round) is Audi1.

Allan

[Radarek]

Take a look for some pictures from our camaro cup some time ago.
For now we had to remove 2 feet extension due to track been to big for my basement. Right now it stands on 76 feet average. 2 amps separate power supplies for each lane.