by BARC 1 » Sat Sep 24, 2016 5:01 pm
Yes I have used all the techniques mentioned, but I was wondering if there is an actual resin injection process. Google returned a couple of injection process machines, buy these certainly are not for the home hobbyist. I have a vacuum pump and I used a paint can , but the low visc resin I am using now works well enough that I can't be bothered to get the vacuum pump and can out.
I was wondering if there was a machine where you load up Part A and Part B, and it swirl mixes it on the way to the mold where the resin is injected into the mold like plastic injection except the equipment would be running at room temperature, and less then 20 PSI.
If the injection tube was a two piece affair, it could be pulled apart and the hardened resin removed easy enough. I am just thinking if there isn't something like this maybe there should be.