Petty Plymouth my way.

[FootScoot]

Finished it last night. Just your basic RevoGram Petty Plymouth with my mods. Magnets removed, lead weight added. SCC plain steel wheels front and rear 15X8, 15X10. Slot It. fronts 19X10's, rears Paul Gage 20X12's. 5/32" aluminum tubing for exhaust. :)

[HomeRacingWorld]

Looks good Ken, nice work on this one.

Stuffed those wides in there, bet it hooks up enough to peel the track surface :)

[FootScoot]

The wide tires clear easily on the gear side. It takes some work on the other side. The bushing was filed down flat against the chassis, and I opened up the inside of the fenderwell with a Dremel and a milling bit. Just clears, but it does clear. I also used Slot It axles on it too. :)

[lotuscortina]

that looks really good,i bought the jim hurtubise and the paul goldsmith plymouth's so my funds don't quite stretch to that one at the moment,but i love these cars,hat's off to monogram i say for producing these,those cb steel wheel's look just superb.
nige

[FootScoot]

Thanks guys. I had the wheels laying around. I had bought them for another project, but that didn't happen, so they ended up on this one. I have a few of these cars that I'm slowly working on. :) Still on the DTM Mini, but it's progressing slowly. :roll:

[dreinecke]

Ken, it looks wicked!