Page 1 of 5

Avant chassis arrived

PostPosted: Wed Mar 15, 2017 7:00 pm
by BARC 1
I ended up buying a bakers dozen of these chassis. The first 3 arrived today. Pulled the magnets installed some PGT's and set up the front wheels. The chassis beat my previous best 15 lap qualifying run by 7 seconds. The chassis came with an orange Long can ,aluminum rear wheels and a metal angle spur gear. For $10 / chassis there was not much to risk. Glad I bought them.

Surprisingly I never added any weight and the chassis just smoked my track. I am guessing those long cans are adding some magnetic downforce judging from what was reported on the TA proxy thread

Bought these on eBay from a Chinese surplus clearing centre. They arrived unbelievably fast. I didn't think I would see them until May!.

I am going to install an 18 k 130 and see what it does.

Re: Avant chassis arrived

PostPosted: Wed Mar 15, 2017 8:55 pm
by Racie35
Good news! Put a body on it now

Re: Avant chassis arrived

PostPosted: Wed Mar 15, 2017 9:22 pm
by BARC 1
Yes, I was looking at a Porsche 956 that might look good on it. Will try some fitting out later.

Re: Avant chassis arrived

PostPosted: Wed Mar 15, 2017 9:29 pm
by BARC 1
Ok I just checked . I ordered this on March the 9th and they are unpacked and on my track today March the 15th!!!!! From China!!!! The Proxy car I mailed to Austin still isn't there going on 10 days.

Re: Avant chassis arrived

PostPosted: Wed Mar 15, 2017 9:52 pm
by chappyman66
Glad to hear it. I bought a few, and have already received ship notification but haven't seen the chassis yet. They are supposed to be fast. Sounds promising!

Re: Avant chassis arrived

PostPosted: Thu Mar 16, 2017 9:09 am
by Nor Cal Mike
I looked on Ebay and didn't find them. Anyone have a link?

Re: Avant chassis arrived

PostPosted: Thu Mar 16, 2017 9:16 am
by Dodgefarmer
http://www.ebay.ca/itm/Mini-180-Motor-C ... itbLUlCBCQ

The $2.98 price is for the motor.

HTH
Randy

Re: Avant chassis arrived

PostPosted: Thu Mar 16, 2017 9:26 am
by Racie35
What shipping did you choose to get it here so fast ?

Re: Avant chassis arrived

PostPosted: Thu Mar 16, 2017 9:28 am
by Dodgefarmer
It's free

Re: Avant chassis arrived

PostPosted: Thu Mar 16, 2017 9:36 am
by 007jag
Hi,
Could you fine folks give me a clue to the source
Of these please.
I'm late to the party again.
Thx, :text-thankyouyellow:
Jack

Re: Avant chassis arrived

PostPosted: Thu Mar 16, 2017 10:11 am
by Racie35
There's a link above 007

Re: Avant chassis arrived

PostPosted: Thu Mar 16, 2017 10:24 am
by redlynr
Those are 21k motors. Hopefully not being used in the TA proxy...

Good deals, though!

Re: Avant chassis arrived

PostPosted: Thu Mar 16, 2017 11:14 am
by Nor Cal Mike
Thanks for the tip. I ordered four. I am not sure exactly what series I will use them for. I'll check the wheelbase when they come in and decide what they will fit under. My first notion was some roundy rounders. I also have a late model Trans Am series that I have been playing around with.

Re: Avant chassis arrived

PostPosted: Thu Mar 16, 2017 12:10 pm
by Racie35
Now, to find a few bodies it fits easily :music-rockout:

Re: Avant chassis arrived

PostPosted: Thu Mar 16, 2017 1:14 pm
by BARC 1
They have a long wheelbase and were used for the ALM cars. I cut my first one up this morning and made it it fit under a 917.