Cut and gathered pieces for an inline ladder-type chassis.
- .055" piano wire for main rails and front axle uprights
- .032"x .75" brass strip for rear and middle crossmembers
- .064" x .75" brass strip for guide tongue
- Slot It 20.5k Flat 6 motor
- Slot It 10t pinion gear and Plafit/Sigma 30t crown gear for 3mm axle
- Sloting Plus 3mm axle
- Sloting Plus 3mm rear axle bushings.
- JK F1 motor pod (.75" wide)
- Scale Auto universal guide with Samson guide post
Should be together soon.
Dan