The Mustang is a little too big but could be usable. I am going to include some details about a different Maisto car here because I am working on it.
![Image](http://i1104.photobucket.com/albums/h329/Ken_Krout/IMG_1972_zpscdry8iuh.jpg)
This is the 1/24 Challenger. I got it for under $20. I have a comparable model car in 1/25 scale and here are the 2 side by side.
![Image](http://i1104.photobucket.com/albums/h329/Ken_Krout/IMG_1971_zpstimc4onz.jpg)
I actually think it might be pretty close because the difference between the 2 scales is noticeable. When I ordered it they said colors may vary and I got stuck with green. Not my favorite but it is growing on me.
Here is a detail of the inside of the headlights, and you can see it is perfect for installing LED lights, even having grooves for the metal prongs.
![Image](http://i1104.photobucket.com/albums/h329/Ken_Krout/IMG_1973_zpstylum6ti.jpg)
Here is the rear, again with perfect locations for bulbs.
![Image](http://i1104.photobucket.com/albums/h329/Ken_Krout/IMG_1974_zpsreeutqdy.jpg)
Here is the inside. I will have to fabricate an interior or run with the tinted windows.
![Image](http://i1104.photobucket.com/albums/h329/Ken_Krout/IMG_1975_zpskk9n4xpm.jpg)
The detail is pretty good, with nice graphics.
![Image](http://i1104.photobucket.com/albums/h329/Ken_Krout/IMG_1978_zpsqf53y4ad.jpg)
![Image](http://i1104.photobucket.com/albums/h329/Ken_Krout/IMG_1976_zpsgb14b0g8.jpg)
Not a bad shortcut to a custom built car without worrying about the paint. I had been using model cars for custom builds but these seem like they can take a little more abuse. The Bentley is really tempting to me as well, but I already have the Scaley version in 1/32.