55 Chevy all painted and at the drive-in!!

[Dundee Denny]

[Dundee Denny]

[HomeRacingWorld]

Ah yeah! What a car! I know Da Boyz will make a hot rod.

[TuscoTodd]

That ought to make for a sweet build!
Looking forward to seeing the Boyz go to town on it!

[model murdering]

Inspiring indeed Denny.

You got me scheming now!

[dw5555]

Well at least you got a complete one. I bought a new sealed one years ago and it was missing the flip frontend so I used it in the track scenery.
Dave

[bobbyraz49]

As someone who has never tried putting a static body on a slot car chassis .... how close does the body come to actually fitting ?
Do you shorten or extend the chassis ?
I just picked up a static 1/32 firetruck and was considering making an attempt.
THANKS !!!

[Dundee Denny]

[Dundee Denny]

[chappyman66]

Don't mean to hijack the thread....but a quick alignment tip for cutting chassis if you don't have a chassis jig:
Glue a pair of tubes along the edge of the chassis where you plan to cut.
Cut through the tubes.
Use a smaller tube or rod inside the tube ends to along the chassis parts if your cut is not perfectly straight.
Tack with CYA and check alignment before final gluing.

Or....just use a chassis jig if you have one. :-p

[Dundee Denny]

Thanks for chiming in, I just learned something as well!

Dundee Speedway doesn't have a chassis jig in its garage!!

Thanks!!

[Dundee Denny]

[Dundee Denny]

[waaytoomuchintothis]

[Dundee Denny]