New roundy-round chassis - finished (more or less)

[nhdungeonracer]

[HomeRacingWorld]

Looking good. With you there is no telling. :)

[Gameover]

You have my attention!

[nhdungeonracer]

[Rleog]

WARNING!

This Roundy-Round disease is highly contagious.

[Z-carfan]

WOW!! That is super cool!

[ccobra]

Wow, with the ti-power setup, it should go roundy-round pretty quick. :) Looks great, now I'm interested in this on.

[chris]

Oh yeah! Great job there.

Gotta love them Supermodifieds.

Chris.

[Broman62]

[TuscoTodd]

That is a SWEET looking build! Should make for a very cool looking pair!
:text-bravo:

[HomeRacingWorld]

I remember this kit. Tom and I built a few. We used the H&R fronts, but looks like you are going CB Design 17s?

[nhdungeonracer]

Wow, thanks for the compliments everyone :oops: :D

Broman, be glad to share the parts list...

Motor is a H&R Hawk with 10t 5.5mm pinion
Using Sloting + axles and a Scaleauto 25t gear. I like the Scaleauto gears cuz they can be used without the centering groove (similar to Parma gears). I was planning to use a Parma gear, but the way the body is shaped at the rear, I couldn't fit it under the body work without rubbing issues.
Rear wheels are CBD 17x11 5 spoke Racing, and fronts are also CBD, but 17x8 5 spoke Racing (Harry's guess was correct :D )
Currently, the rear tires are PG 22128's, but I do have set of 22124's on the way from SCC which I hope will fit tighter on the wheel. The front tires are PG 21105's. Yes, they can be stretched onto the 17mm wheels.
The main part of the chassis is made from 1/8" square tubing.

[sixtiesracer]

What are you going to use for a driver figure??

[nhdungeonracer]

I tried a 1/25 driver figure put out by Champion, but they seem a little too big.
So looks like I'm going to cannibilize one of the interiors I've removed from a car and use that for a driver... :D

[nhdungeonracer]