2018 NSR Nationals

[mikeinclover]

[Brumos RSR]

Take picks of em without the bodies on please

[Oscar Racing]

Nice to see no magnets as ballast, plus plenty of time to prepare...

Very glad to see Cloverleaf hosting again...

[cj74]

Looking forward to it! If you haven't been to Cloverleaf Racing and enjoy raciing NSR, notes the time!

Let's do this!

[MacMoose]

[mikeinclover]

[mikeinclover]

I would like to throw out a tuning tip for anyone looking for one. This is a legal tip for the Nationals that is why I have added it here. You are allowed to use NSR4855 BRASS Axle Spacers 0.160" (4.06mm) Thick for 3/32" (2.37mm) Axles in the front of your chassis to take up the slop. The spacers will slide into the hoops and should not require any modification to the chassis. It is a snug fit. You can then add some oval point set screws to your chassis and adjust the axle / front wheels to your liking.
Mike

[mikeinclover]

We will be opening the doors on Friday for test and tune at 9am.
Mike

[Fathead59]

I have a question for any other type Racing , some of my builds I have been using brass washers as spacers, is there any rule against using them. My question would be for future builds for any other races

[Fathead59]

And if I am in the wrong forum for that question please feel to move it to the right spot

[Pappy]

Fathead, only if you win is it illegal. Then you will get disqualified in the post race tech inspection. :lol: Just kidding, no rule against it in any class I race but there could be a series that requires stock spacers that aren't brass. You'll just have to check with the local slot car law enforcement organization. :D

[mikeinclover]

For any race that we hold at this time brass spacers are legal. Most of the NSR spacers are brass anyway.
Mike

[Fathead59]

The only reason why I ask is the spacers I have on the H&R RTR chassis are plastic and when I was building my 1/32 scale I started using the brass washers, and the reason I used them was because the bushings were brass . And by using them you were able to get the tires closer and can tuck inside the wheel wells better.