Clover Leaf Racing NSR Nationals

[mikeinclover]

I have a couple thing that will need to be addressed.
1) In the vintage class if the car came with a spare tire the tire must be in the car in the correct location.
2) Due to the interest in the race we are going to move everything back 2 hours doors will open at 7:00, tech will start at 9:00 and racing 10:00.
IF you have any questions please feel free to ask.
Mike

[Smokeio]

Somebody wake up Dennis.

[gascarnut]

Oh, I'm awake, don't worry!

Hope you had a good Thanksgiving.

[mikeinclover]

Nice start on the paint Mike can't wait to see them when you are done. Seem to be missing the inserts.
Mike

[Smokeio]

[Oscar Racing]

I believe he is referring to the wheel inserts...

The NSR Nationals must have all stock body parts (which includes wheel inserts) on the car....

[gascarnut]

Not wanting to change the subject, as I enjoy roasting Smokeio as much as the next person, but can someone please post information about the following:

1. The braid recess on the the track
2. The controller connections and polarity used
3. The voltage fed to the lanes

Thanks!

[mikeinclover]

Dennis we just got done rebraiding the track today so I will have to measure it as it has changed. Controller hook up recommend to get power to your car you can use an XLR plug or gator clips. It is positive polarity. Voltage will be. 11.3 unless Mike likes that then we will change it.
Mike

[gascarnut]

Thank you!

Does Mike even know that Volts can go above 10?

[Smokeio]

I don't like it. What's a volt? I got me some of those. The more, the faster we go.

[Pappy]

[Smokeio]

[mikeinclover]

Just measured the braid at the track and it is .050 below the deck.
Mike

[gascarnut]

[mikeinclover]

Not sure what is normal, I went a little lower than I planned but it is close to what I wanted.
Mike