Policar Lotus Arriving

[scatman]

Andi, I put more laps on the car today, and I agree with running the car at 12 volts. No problems with keeping this car under control. Congrats on a winner.

[gascarnut]

[gascarnut]

[chappy]

Hi , for Urethane tires I know the PGT 20125 vits and the 20116 also.
Just depends on width and sidewall you need, but the 20125 seems to be a good one.
Bob

[CCC]

[chappy]

Sounds nice and quiet too CCC.
Which PGT did you use?
Good video.
Bob

[Rleog]

Mine arrived today and I wasted little time before I began taking it apart. It looks like it'll need ballast up front. I made a minor adjustment at the axle stopper to prevent the axle gear from rubbing against the side of the compound gear.

Andi: on other BB's, I've seen your very impressive instructions on how to alter other F1's, such as SRC or FLY, to accept your Policar drive trains. If it's not too much trouble, could you gather that information and post it on the Policar web site for easy reference? I'll definitely be attempting at least one of those alterations.

Congratulations on getting your product out there. You have every reason to be proud.

Bob G

:text-thankyouyellow:

[chappy]

Hi Dave, yes they fit and the center rib is fine , but the tire on the Fly Lotus is much wider.

Fly tire on the right rear , of the policar lotus


Policar tire on the right rear of the Fly Lotus


Bob

[CCC]

[chappy]

Nice Curtis are they a good tight fit or did you have to glue them.
It looks good , but hard to tell at speed , and runs so nicely.
Bob

[HomeRacingWorld]

I always use a coat of Hansens Hard As Nails to secure the tire, tight fit or not. Just me.

[chappy]

Harry you taught me about the hard as nails and thats all I use now.

Dave do you have any red tint for your tires, if so mix one drop for every 2 of black.
trust me on this, the tires will still be black.
Bob

[chappy]

Yes , Dave.

[CCC]

[chappy]

Thats great Curtis , I like to start with a good tight fit even though I use the Hard as Nails to secure them.
Bob