Home Racing World

I see an order for some Cuda chassis-es.

Well Steve you had you Cuda running quite well with a stock chassis last year. Surprised me to see you switch to a Chevy. But you're sitting in 2nd with it so whose to say what that Cuda would have done this year. Now is that Camaro on a stock chassis or a podded one.


Arrold

I would love to see a chassis for the Ninco Jag and or Corvette body. I know that you do the Ferrari and Alfa but the 62 and older sports cars seem under represented.

How about chassis for those lead sled Carrera 1/24 cars? Make one that uses BRM compnents and I think you might sell a few.

Hey all you at Olifer do you have a track ? You do a great job with your chassis are you testing them on a track ?

Dude!!!! Tell me it's retroactive to Friday morning

Looks like time to stock up for the winter. I for one will put you to work.
My 2 Cobra chassis and pods are great. One put together at camp this weekend.

Recently I won a Fly Marcos in a raffle, those have a front motor and slightly wobbly stub axles, so they are not the best runners. I needed an excuse to try a printed chassis and this was it. I ordered the Olifer chassis that is made for the Fly Marcos and it was delivered on the promised date. The chassis was just about perfect as received. The only changes that I made were to shave the bottom of the guide flag holder and to sand the sides of the chassis a little. The car turned out to be much lighter than our rules permit, I did add some weight to the motor pod for a start, but the car was still a bit light when I tested it last night. The car looks to be a good runner, but it wants to tip at the limit, enough lead low in the chassis to bring the car to the minimum weight limit should fix that.

The Marcos is looking really good! And it should now have a performance that matches its looks :auto-driving: