help with tire size
Posted: Fri Feb 23, 2018 4:31 pmCan anyone tell me what size PGT do I need for a Policar 1/32 lotus 72d and a Policar 1/32 Lotus 72c. Rear tires .
Page 1 of 1
Posted: Fri Feb 23, 2018 4:31 pmRe: help with tire size
Posted: Fri Feb 23, 2018 4:34 pmRe: help with tire size
Posted: Fri Feb 23, 2018 4:37 pmThanks Harry.
Re: help with tire size
Posted: Wed Feb 28, 2018 8:01 amHarry, I got the 2 above mentioned cars yesterday. Are there any tuning that should be done to these cars , other than the rear tire upgrades , oil and grease job? I noticed a small allen wrench that came with them. They actually did pretty well right out of the box. They will slide quite a bit on the corners , but didn't seem to deslot very easily. These are for a carerra plastic track.
Re: help with tire size
Posted: Wed Feb 28, 2018 9:00 amRe: help with tire size
Posted: Wed Feb 28, 2018 9:22 amThanks Harry
Re: help with tire size
Posted: Wed Feb 28, 2018 9:49 amYou are welcome, glad to help.
There are quite a few folks on here racing and collecting them. These are likely some of the best slot cars you can buy dollar for dollar...if you like the genre of course.
Might as well grab that new March. It's a looker.
There are quite a few folks on here racing and collecting them. These are likely some of the best slot cars you can buy dollar for dollar...if you like the genre of course.
Might as well grab that new March. It's a looker.