I'm going to try this again. 3 or 4 pics at a time!
This little R2 chicane caused more trouble than it was worth. The cars would come into it and slam off the 1st wall, into the next and bounce back and forth off the guard rails down the following straight. This wasn't working on my high speed track.
I was going to replace the R2s with R4s. The 2 R4s didn't work out to having all the track connect with the pieces I had on hand BUT..running an R4 into an 8", 4" R3 combination did!!
I think this should take .5 second or more off the lap times and save some serious crashes through there!!
The entrance with consession stands and vendor tents
Walkway to upper infield and motorhome parking. Also partiers, USMC Color Guard and Sponsor tents
My homemade TV Tower with lighted SHELL sign
Far turns with American Idol tryouts and lighted Citgo sign
This is a stock 1/43 DSlot43 before the R2 chicane change. I haven't run the track since but will be very soon. It needs a little work due to the furnace guys needing to get right in the middle of it to put a new motor on the exhaust ductwork. Simple cleanup and guard rail and safety wall replacing.
Furnace Guys!!LOL
Done!