Home Racing World

This is Thunder Road, routed MDF with Carrera digital D1XX integrated. It is on a 7X14 tilting table and the lane length is about 55 feet. Not shown is the computer monitor along the back stretch, I use Bruce Yingling RMS. This was taken just over a week ago, it now has four single lane changers and a pit lane. I can also run analog by unhooking/hooking up some other wires.

That is SWEET!

VERY nice !

Two former layouts: 3 lane Strombecker; 3 lane Scalextric
strombecker track.PNG

final 7 whole layout 2.jpeg

My new track is MDF with copper tape and homemade adjustable power at the driver's stations from a 15V 3A power supply.


Table is 7.5x9 ft, lap length right around 40 ft.
Scenery to come...initial laps being run for now.

Razor Raceway 184 Feet long 30 Volt 20 Amp power, 10 Jumpers per lane, Parma Econo. Drivers Station with reversing switch

Here's our new CincySlots shop track. It's not totally complete but we're getting there. We still need to install the analog components and dress it up a little.

Now that turned out top notch.

Thanks, it's coming along. Here's my home track. You've seen this before. It's going to get a makeover soon.

Great tracks everybody.

My HO dirt oval, Leadfoot Speedway. Sometimes I wish I had made it a flat-8.

Here is where I run!
6m x 1.6m Tables, not sure of the length
Still plenty to finish off, Timing, proper Driver stations, scenery, Pit Buildings, rumble strips, etc



Cheers
NimROD

Very nice track, Nimrod. Looks like it has a good flow. That, to me, is the most important aspect of a good track. I also like the straights so the cars can stretch their legs a little bit. Are you going to run the LE Audi DTM when it gets to you?

Thanks Mate
But all the credit for the track build and design goes to a gentleman in Canberra.
Unfortunately it and all the wiring was damaged in transit.
It took me about 3 weeks to fix and rewire everything.
A fast lap would be around the 6 sec mark.
Yes the DTM will definitely be seeing some track time

Cheers
NimROD