Show your track! - 2017

[buspor63]

This is Thunder Road, routed MDF with Carrera digital D1XX integrated. It is on a 7X14 tilting table and the lane length is about 55 feet. Not shown is the computer monitor along the back stretch, I use Bruce Yingling RMS. This was taken just over a week ago, it now has four single lane changers and a pit lane. I can also run analog by unhooking/hooking up some other wires.

[MikeyAutobahn]

That is SWEET!

[bobbyraz49]

VERY nice !

[4380r]

Two former layouts: 3 lane Strombecker; 3 lane Scalextric
strombecker track.PNG

final 7 whole layout 2.jpeg

[chappyman66]

My new track is MDF with copper tape and homemade adjustable power at the driver's stations from a 15V 3A power supply.


Table is 7.5x9 ft, lap length right around 40 ft.
Scenery to come...initial laps being run for now.

[RazorJon]

Razor Raceway 184 Feet long 30 Volt 20 Amp power, 10 Jumpers per lane, Parma Econo. Drivers Station with reversing switch

[Gipper]

[Cincyslots]

Here's our new CincySlots shop track. It's not totally complete but we're getting there. We still need to install the analog components and dress it up a little.

[HomeRacingWorld]

Now that turned out top notch.

[Cincyslots]

Thanks, it's coming along. Here's my home track. You've seen this before. It's going to get a makeover soon.

[mattb]

Great tracks everybody.

[bdsharp]

My HO dirt oval, Leadfoot Speedway. Sometimes I wish I had made it a flat-8.

[-Nimrod-]

Here is where I run!
6m x 1.6m Tables, not sure of the length
Still plenty to finish off, Timing, proper Driver stations, scenery, Pit Buildings, rumble strips, etc



Cheers
NimROD

[Czar]

Very nice track, Nimrod. Looks like it has a good flow. That, to me, is the most important aspect of a good track. I also like the straights so the cars can stretch their legs a little bit. Are you going to run the LE Audi DTM when it gets to you?

[-Nimrod-]

Thanks Mate
But all the credit for the track build and design goes to a gentleman in Canberra.
Unfortunately it and all the wiring was damaged in transit.
It took me about 3 weeks to fix and rewire everything.
A fast lap would be around the 6 sec mark.
Yes the DTM will definitely be seeing some track time

Cheers
NimROD