Page 1 of 1
Wiring digital Carrera car for analog proxy
Posted:
Tue Mar 14, 2017 8:33 amby Burrell
If I were to want to enter an analog proxy, but needed to prep my car on my digital track since I do not have an analog track, would I need to change the polarity on the car after it was ready. This is assuming I also remove the chip prior to sending in the car (and do not replace it with the analog chip that can change the polarity).
Re: Wiring digital Carrera car for analog proxy
Posted:
Tue Mar 14, 2017 9:03 amby kidvoltage
No, you should just be able to unplug the wires, remove the digital chip and plug in the remaining motor plug to the guide wire plug and off you go.
At least that was my experience.
Re: Wiring digital Carrera car for analog proxy
Posted:
Tue Mar 14, 2017 9:15 amby Burrell
Awesome! Thanks!
Re: Wiring digital Carrera car for analog proxy
Posted:
Tue Mar 14, 2017 9:36 amby Z-carfan
Ditto, I actually did the reverse for the digital proxy Burrell. Testing on my analog wooden track, (Ferrari 458) then popped in the digital chip for the proxy. I think the only thing Audi had to do was flip the switch as I had it in the wrong direction.