Please Delete

[olskoolslotz]

Please delete, photo hosting service lost

[crossovercrazy]

On the electronic Goldmine motors, what is the ROM rating at 12 volts, and the number of teeth on the pinion?

[olskoolslotz]

crossovercrazy, The 1/43 scale guy's are familiar with that motor referred to as G9330 motor, they seem to run them at 9V. The motor has a 10t pinion and at 12V is rated 38,000 RPM from what I found searching in the 1/43 section.

[crossovercrazy]

Is this the motor marked "MH417A" in the pictures?

[olskoolslotz]

Yes, I got these in a motor lot and to be truthful I'm unfamiliar with 1/43 scale. I did find a description for MH417A motors showing them as 19,000 RPM at 6V. One motor in my photo at the top right is marked MM413A, this one I acquired from someone to try out at some point. On the Electronic Goldmine page the motor shown in their graphic is marked MJ413A, I can only assume these are different lot or run numbers but expect the motors to be the same spec. Maybe someone from the 1/43 group can help us both out.

[Dodgefarmer]

6V, 15ohm Controller (IIRC). HANG On when you pull the trigger. :lol:

Randy

[olskoolslotz]

To the top once for reduced pricing.

[gascarnut]

I will take the Slot Car Heroes motors, please send me your PayPal info.

Thanks