Odds & Ends (Routed and SSD)
Posted: Tue Jan 09, 2018 7:05 pmA few leftovers from my routed/digital hybrid track. Shipping is $7 per box to the CONUS. I will ship other places, but will need to get an estimate first.
Slot Car Corner: Deluxe Braid Roller $25,SOLD Special Router Bit for 1/4" Braid (automatically routes gains to correct depth on either side of the slot) $25, PENDING 1/8" Straight Router Bits $8/each SOLD, Luff Manufactured Router Fence $10
Approximately 75' of Slot Car Corner 2-sided tape for attaching 1/4" braid $20 PENDING
Slot.it SCP-1 Controller with C7002 Digital Plug for SCX and Scalextric SSD $60
Scalextric SSD controllers $10 each
Truespeed SSD Controller for Scalextric $45 PENDING
Slot Car Corner Set-up Blocks $8 each SOLD
Scalextric Advanced 5-car powerbase: One position does not work (probably a loose connection at the controller jack). Tabs were removed from the track to fit into the mdf, jumpers are attached to the bottom of the track. The powerbase is already updated with the improved firmware. Good for someone who can remove the powerbase from the track (not real easy), wants to add it to a routed track, or who can use the parts. $50
Slot Car Corner: Deluxe Braid Roller $25,SOLD Special Router Bit for 1/4" Braid (automatically routes gains to correct depth on either side of the slot) $25, PENDING 1/8" Straight Router Bits $8/each SOLD, Luff Manufactured Router Fence $10
Approximately 75' of Slot Car Corner 2-sided tape for attaching 1/4" braid $20 PENDING
Slot.it SCP-1 Controller with C7002 Digital Plug for SCX and Scalextric SSD $60
Scalextric SSD controllers $10 each
Truespeed SSD Controller for Scalextric $45 PENDING
Slot Car Corner Set-up Blocks $8 each SOLD
Scalextric Advanced 5-car powerbase: One position does not work (probably a loose connection at the controller jack). Tabs were removed from the track to fit into the mdf, jumpers are attached to the bottom of the track. The powerbase is already updated with the improved firmware. Good for someone who can remove the powerbase from the track (not real easy), wants to add it to a routed track, or who can use the parts. $50