1:32 Strangebrew modifieds for sale

Used Car Salesman?
Buyers & Sellers HQ

1:32 Strangebrew modifieds for sale

Postby strangebrew » Mon Mar 20, 2017 11:47 am

..................These cars are 1:32 scale.............................
First of all I'd like to state, I'm uncomfortable selling any of my builds, because I never feel they're "up to snuff".
That being said, I've spent the last 6 weeks, on these cars, & spent quite a bit of extra time getting things right.
I will guarantee your money back & I'll pay the return shipping if the buyer doesn't get what's expected!
Everything on these cars is brand new, out of the package & they have only about a dozen laps on my small oval to
ensure nothing will fall off. All the bodies are a combination resin/styrene/epoxy construction & are "one-offs".
You can PM me with questions etc.
--------------------------Thanks for looking--------------------------------

They are guaranteed to pass tech. at the HRW SHOWDOWN...................so here goes!

First up a (Ready To Run) Chevette modified:

Chassis is a combination 1/16, 3/64 brass rod & assorted flat brass construction.
wheelbase is 3 1/4"
Koford steel axles:
..................I prefer using 1/8 axles on my builds, so that's what you see here)...................
polished & detailed 1/2" wide Pro Track wheels:
PGT shore 40, 22160.395 rear & PGT shore 40, 22160-FF front tires:
...................(Wheels & tires glued & trued on Tire Razor)....................
Jet guide flag with Big Mama copper braid:
Piranha motor, Parma hex head motor screws:
Cox 27 tooth crown gear & Professor Motor 9 tooth pinion:
All mounted with Walther 1/4 self tapping screws:
Paint is Ace Hardware "Bright Yellow" over Ace Hardware white primer.
Decals printed by me:

Keep in mind: EVERYTHING is brand new...............All you need to do is put your "tune to it"

===================$120 shipped =========================

Image
Image
Image
Image
Image

Next up is a (Ready to Run) 38/40 Ford Coupe:
(I'm kinda' proud of this one.....I don't think I've ever built a better one :D )

Chassis is a combination 3/64 brass rod & assorted flat brass construction.
Wheelbase is 3 1/8".
Koford steel axles:
..................I prefer using 1/8 axles on my builds, so that's what you see here)...................
Painted & detailed 1/2" wide Pro Track wheels:
PGT shore 40, 22160.395 rear & PGT shore 40, 22160-FF front tires:
...................(Wheels & tires glued & trued on Tire Razor)....................
Jet guide flag with Big Mama copper braid:
Piranha motor, Parma hex head motor screws:
Cox 27 tooth crown gear & Professor Motor 9 tooth pinion:
All mounted with Walther 1/4 self tapping screws:
Paint is Ace Hardware White overlayed with several coats of Dupli-color Clear Effects
giving it a diamond flake appearance under the lights.
Decals printed by me:

EVERYTHING is brand new, just a little tune might be needed.

===================$125 shipped =========================

Image
Image
Image
Image

How about a couple of "finish it to taste" modifieds:

First is a '74 Vega:

This one is set up using 3/32 axles since most of the guys on here use them.
the wheelbase is 3 1/4" & I set it up using CB design 12m wheels with PGT 22126 tires on the rear &
CB Design 11m wheels with PGT 21126 tires on the front.

Chassis is a combination 1/16, 3/64 brass rod & assorted flat brass construction.
Brand new Jet guide with Big Mama braid is included.
Also included are driver figure, engine, air cleaner that fits under styrene hood scoop,
radiator & Walther mounting screws.
Complete assembly has several coats of Ace Hardware grey enamel primer.

===================$75 shipped =========================

Image
Image

I have wheels & tires mounted to display only how the set up might look on the track.

Image

Last one up is a 37/38 Chevy coupe modified:

This one is set up using 3/32 axles since most of the guys on here use them.
the wheelbase is 3 1/4" & I set it up using CB design 12m wheels with PGT 22126 tires on the rear &
CB Design 11m wheels with PGT 21126 tires on the front.

Chassis is a combination 3/64 brass rod & assorted flat brass construction.
I built this one using oilite bearings in the rear.
Brand new Jet guide with Big Mama braid is included.
Also included are driver figure, engine/radiator/air cleaner combo.
& Walther mounting screws.
(I added a small hood later as an after thought)
Complete assembly has several coats of Ace Hardware grey enamel primer.

===================$75 shipped =========================

Image
Image

I have wheels & tires mounted to display only how the set up might look on the track.

Image
Last edited by strangebrew on Mon Mar 20, 2017 12:24 pm, edited 1 time in total.
User avatar
strangebrew
HRW SlotCar Veteran!
 
Posts: 760
Joined: Mon Jan 27, 2014 1:50 pm
Location: Southern Illinois

Re: 1:32 Strangebrew modifieds for sale

Postby btaylor » Mon Mar 20, 2017 12:19 pm

Good deal on those cars Brew! Your time on those is invaluable! Someone will be getting some nice rides.

Bob
Crossroads SUPER Speedway
Cherokee Point 80' Road course
User avatar
btaylor
Uncle Bob
 
Posts: 4053
Joined: Mon Mar 24, 2014 3:50 am

Re: 1:32 Strangebrew modifieds for sale

Postby pastor bubba » Mon Mar 20, 2017 3:30 pm

I wish I had some spare money but focusing on the engine for my AMX right now. Hopefully another time.
pastor bubba
HRW SlotCar Veteran!
 
Posts: 283
Joined: Tue Dec 17, 2013 9:30 pm
Location: Salina, KS


Return to FOR SALE!

Who is online

Users browsing this forum: No registered users and 1 guest

cron