Page 4 of 5
Re: The start of something BIG - Mas Blasto
Posted:
Sat Jan 03, 2015 9:15 am
by indybob007
Looks great. On magnetic paint' I have heard some horror stories. It can come loose and gets up in the cars and can kill a motor. Now this is what I have read. Plus I heard the magnetic properties are not strong enough to do any traction help. But Love the track.
Re: The start of something BIG - Mas Blasto
Posted:
Mon Jan 05, 2015 10:01 am
by masmojo
Re: The start of something BIG - Mas Blast-O Ring
Posted:
Tue Jan 06, 2015 10:10 am
by masmojo
Re: Something BIG - Mas Blast-O Ring
Posted:
Tue Jan 06, 2015 11:33 am
by pfuetze
if i could start new, i would use xlr plugs
Re: Something BIG - Mas Blast-O Ring
Posted:
Tue Jan 06, 2015 2:39 pm
by masmojo
Re: Something BIG - Mas Blast-O Ring
Posted:
Wed Jan 07, 2015 9:47 am
by masmojo
Last night I tore open the last of the three HP power supplies for my drivers stations; imagine my surprise when it was COMPLETELY different on the inside!! :angry-tappingfoot: Made by a different supplier!? It's rated the same and had the same model number so I hope it works the same and the performance is comparable to the other two! :roll:
I got all my stuff together, now where did I put that schematic for the voltage regulator circuit!???? :think:
Re: Something BIG - Mas Blast-O Ring
Posted:
Wed Jan 07, 2015 10:57 am
by Fast Co.
Re: Something BIG - Mas Blast-O Ring
Posted:
Wed Jan 07, 2015 6:18 pm
by buspor63
18 volts is zippy, how are you going to step it down?
Re: Something BIG - Mas Blast-O Ring
Posted:
Thu Jan 08, 2015 10:46 am
by masmojo
Re: El MasBlast-O Ring
Posted:
Thu Jan 15, 2015 9:37 am
by masmojo
OK a quick update, because you guys that follow this stuffmay be saying" Mas, whats' up?"
Well I got all my stuff together for my drivers stations and I started to build the Voltage regulator circuits, but I was having trouble locating some "bits" and I realized that some of the parts I had where not ideal. Anywayz I went on-line to flea-bay to find the correct voltage regulator component and was quite surprised to find that those enterprising individuals in Hong Kong were taking the plans that I found on the internet and not only were they building them, but they were nicer and had more bells and whistles then the one I was going to build for less then it would cost me to buy all the parts!!! So then the dilemma finish building them myself or buy them ready made?? A no brainer really! So, I will probably have to wait 10 days or so for them to get here, but I can work on other stuff til then!
When they arrive I will most likely have to modify them slightly; move the Pot. and the cooling fan, but that should be easy peasy! :whistle:
Re: El MasBlast-O Ring
Posted:
Fri Jan 16, 2015 11:33 am
by masmojo
Re: MasBlast-O Ring
Posted:
Fri Jan 30, 2015 2:57 pm
by masmojo
Re: MasBlast-O Ring
Posted:
Mon Feb 09, 2015 2:56 pm
by masmojo
Re: MasBlast-O Ring
Posted:
Tue Feb 10, 2015 8:59 pm
by dreinecke
Mas - the track is looking great, but those electronics...that is really great work too!
Re: MasBlast-O Ring
Posted:
Wed Feb 11, 2015 12:27 am
by pfuetze
nice driver stations!
i like the first pic with the Porsche :)