Steel Valley Racepark

Got Wood?
Your ROUTED TRACK Home!
Share Your Designs, Building Techniques & Finished Layouts!

Steel Valley Racepark

Postby Noahracing » Fri Oct 05, 2012 9:23 am

Checking to see if I'm doing this right....looks like I did :mrgreen:

1/2" MDF - 3 coats latex, 2 coats clear. Sanded between each coat
3 lanes - Multiple Squeezes
Lap length: 101' each
Trackmate Timing
MG 10amp 0 - 20v Power

Image

Image

Image

Image

Image

Image
Last edited by Noahracing on Fri Oct 05, 2012 10:52 am, edited 2 times in total.
User avatar
Noahracing
 
Posts: 21
Joined: Thu Sep 06, 2012 7:12 am
Location: Columbiana, Ohio

Re: Steel Valley Racepark

Postby nhdungeonracer » Fri Oct 05, 2012 10:32 am

Yep, I think you done ok...

Looks awesome!! :dance:
User avatar
nhdungeonracer
SCC Mechanic
 
Posts: 1776
Joined: Tue Sep 04, 2012 7:00 am

Re: Steel Valley Racepark

Postby Noahracing » Fri Oct 05, 2012 10:37 am

Thank You. Lol....I was actually checking to see if I did the photo right. But I appreciate the comment :handgestures-thumbup:
User avatar
Noahracing
 
Posts: 21
Joined: Thu Sep 06, 2012 7:12 am
Location: Columbiana, Ohio

Re: Steel Valley Racepark

Postby DixonJohn » Thu Oct 11, 2012 8:24 pm

Very nice!
User avatar
DixonJohn
"The Mayor"
 
Posts: 593
Joined: Sun Aug 12, 2012 6:57 pm
Location: Missouri

Re: Steel Valley Racepark

Postby HomeRacingWorld » Thu Oct 11, 2012 8:41 pm

I always liked that track. It just looks like one heck of a lot of fun.
User avatar
HomeRacingWorld
HRW Janitor
 
Posts: 15569
Joined: Wed Aug 08, 2012 2:05 pm
Location: HRW Skunkworks

Re: Steel Valley Racepark

Postby baford1 » Fri Oct 12, 2012 1:28 am

Nice track it just seems to get better every time you rebuild it

Richard
User avatar
baford1
HRW SlotCar Veteran!
 
Posts: 260
Joined: Fri Sep 07, 2012 6:15 am
Location: Cairns , Queensland Australia

Re: Steel Valley Racepark

Postby ListerStormGT » Fri Oct 12, 2012 6:51 am

That is just a great looking track! Looks like a lot of fun.
User avatar
ListerStormGT
HRW SlotCar Veteran!
 
Posts: 1196
Joined: Sun Sep 02, 2012 11:24 pm
Location: Florida

Re: Steel Valley Racepark

Postby Fast Co. » Fri Oct 12, 2012 7:31 am

One of my favorites. I love the slightly banked corners and the many undulating elevation changes.
Steve
User avatar
Fast Co.
HRW SlotCar Veteran!
 
Posts: 591
Joined: Mon Sep 10, 2012 4:31 am
Location: NC

Re: Steel Valley Racepark

Postby deslot » Fri Oct 12, 2012 11:41 am

Very nice, look's like a track that will keep u lookin ahead at speed. love the switch backs.
User avatar
deslot
 
Posts: 52
Joined: Sat Sep 22, 2012 9:38 am
Location: Rolling Prairie,IN

Re: Steel Valley Racepark

Postby Noahracing » Tue Oct 16, 2012 7:25 am

Thanks alot guys! As I've said in the past, this track has gone through numerous changes and finally settled on this design. it is a very fun track to drive and once you get a rythym going with 3 cars on the track it's gets very intense. You need to run your guy down, stick with him, and pick your place to pass. There are quite a few squeezes. The 1/24th's are a blact to run as well.
User avatar
Noahracing
 
Posts: 21
Joined: Thu Sep 06, 2012 7:12 am
Location: Columbiana, Ohio

Re: Steel Valley Racepark

Postby Noahracing » Thu Nov 08, 2012 10:07 am

Couple more pictures.....

Image

Image
User avatar
Noahracing
 
Posts: 21
Joined: Thu Sep 06, 2012 7:12 am
Location: Columbiana, Ohio


Return to The Lumber Yard



Who is online

Users browsing this forum: No registered users and 17 guests

cron