by model murdering » Sat Dec 08, 2018 11:27 am
No doubt it does.
I think there are several things at play and the possibilities are many. One is obvious. Your selection of clear top coat, from matte to high gloss, and points between; is where one decides the "tone of clarity" (for lack of a better expression).
The viscosity and manner with which material is delivered can make a huge difference in the finished appearance. Meaning you mix your own and adjust the liquid to air ratio, and or the pressure. (airbrush)
The base color and tone can affect the outcome, most especially the quality of the liquid film your clearing over . Metallics can really eat up a lot of clear, where as a bright single stage monochrome can be easily tipped over the edge. Flat or matte colors under clear can instill the appearance of depth
The quantity applied in a said manner can really change what you started with. Are we simply protecting what would be the natural finish of a project, or are we trying to polish the apple.
More later.