How to Bend Wire The Easy & Efficient Way
Posted: Wed Jul 16, 2014 8:22 amHome Racing World
Your Slot Car Home On the Net!
http://www.homeracingworld.us/
How to Bend Wire The Easy & Efficient Way
Page 1 of 1
Posted: Wed Jul 16, 2014 8:22 amRe: How to Bend Wire The Easy & Efficient Way
Posted: Wed Jul 16, 2014 8:30 amVery nice. Thanks for bringing it over here.
Re: How to Bend Wire The Easy & Efficient Way
Posted: Wed Jul 16, 2014 8:43 amRe: How to Bend Wire The Easy & Efficient Way
Posted: Wed Jul 16, 2014 10:12 amWell dang it boys! Very nice of you sir.
Yes, that is a nice chassis for sure. Really looks good.
Yes, that is a nice chassis for sure. Really looks good.
Re: How to Bend Wire The Easy & Efficient Way
Posted: Wed Jul 16, 2014 4:45 pmShotgunDave,
It actually works much better with 2 pieces of the same size wire soldered together. This way you can lay the soldered together wire along the two pins that hold the already bent piece while you are making the second bend. I can hold a piece of .125 stock in place, but I've done this many times.
Just take 2 pieces of .0625 about 2 inches long and lay them along side the two pins, then make your bend.
If you don't fully understand what I think I just said, please let me know.
It actually works much better with 2 pieces of the same size wire soldered together. This way you can lay the soldered together wire along the two pins that hold the already bent piece while you are making the second bend. I can hold a piece of .125 stock in place, but I've done this many times.
Just take 2 pieces of .0625 about 2 inches long and lay them along side the two pins, then make your bend.
If you don't fully understand what I think I just said, please let me know.
Re: How to Bend Wire The Easy & Efficient Way
Posted: Thu Jul 17, 2014 11:34 amShotgunDave,
Very good. You go to the head of the class.
Now that the light has gone off, let's see what else you can do.
For your next assignment, should you choose to do so, I'd like to see you make a sidewinder chassis. Just bend a piece of 1/16 wire into a 1.000 inch wide "U" loop and bend up the ducktail. Now look at the chassis I built for you and add an axle tube using a piece of 7/32 brass tubing. You will be on your way.
Keep it up - bending wire that is.
Very good. You go to the head of the class.
Now that the light has gone off, let's see what else you can do.
For your next assignment, should you choose to do so, I'd like to see you make a sidewinder chassis. Just bend a piece of 1/16 wire into a 1.000 inch wide "U" loop and bend up the ducktail. Now look at the chassis I built for you and add an axle tube using a piece of 7/32 brass tubing. You will be on your way.
Keep it up - bending wire that is.
Re: How to Bend Wire The Easy & Efficient Way
Posted: Tue Jan 12, 2016 6:13 amThank you for this inspiration.
Re: How to Bend Wire The Easy & Efficient Way
Posted: Thu Feb 18, 2016 7:26 pmMarty and I talked about this article and scratchbuilding in general for a few hours one day.
All he wanted was to help others and he shared his passion for this hobby here as well as all the other forums.
He wanted the "artwork" of slot car scratchbuilding to carry on, and efforts like this one did more than he ever imagined.
It's very rare to meet people that have this level of skill and knowledge, AND the willingness to SHARE it with the world.
I'm heading over to my bench and build something. That is truly the only way I can honor him and remind others of what he gave us.
RIP.
All he wanted was to help others and he shared his passion for this hobby here as well as all the other forums.
He wanted the "artwork" of slot car scratchbuilding to carry on, and efforts like this one did more than he ever imagined.
It's very rare to meet people that have this level of skill and knowledge, AND the willingness to SHARE it with the world.
I'm heading over to my bench and build something. That is truly the only way I can honor him and remind others of what he gave us.
RIP.
Re: How to Bend Wire The Easy & Efficient Way
Posted: Thu Feb 18, 2016 9:30 pmCan we save this thread?
Re: How to Bend Wire The Easy & Efficient Way
Posted: Fri Feb 19, 2016 12:00 amSave it as in what way sir? You want me to copy it and make a dedicated webpage like a review? I can if you think that's best.
Re: How to Bend Wire The Easy & Efficient Way
Posted: Fri Feb 19, 2016 8:16 amWhatever you think is best. Maybe a Rego how to
Re: How to Bend Wire The Easy & Efficient Way
Posted: Tue Feb 23, 2016 1:23 pmI think it would be great (if possible) to have Marty's how to guides compiled into thread under the "Scratch/Brass Building" section - they make for a very nice tutorial! :)
Re: How to Bend Wire The Easy & Efficient Way
Posted: Mon Mar 13, 2017 6:07 pm