Guide shoe installation

In honor of one of the best slot car builders in our hobby.
Share your chassis & scratchbuilt artwork here.

Guide shoe installation

Postby bdsharp » Tue Jul 11, 2017 10:13 am

How much rotational freedom does a guide need in a 1/32 non-magnet chassis? I know the answer is "it depends", but would you say 90* total is enough?
User avatar
bdsharp
HRW SlotCar Veteran!
 
Posts: 155
Joined: Sat Sep 08, 2012 6:05 am

Re: Guide shoe installation

Postby RichD » Tue Jul 11, 2017 12:01 pm

Possibly 90 degrees would be enough. If you race on a track with a very tight hairpin corner a little more travel might be good. If you car is very loose it will hit the stops often and that tends to break the guide flag holder after a while.
User avatar
RichD
HRW SlotCar Veteran!
 
Posts: 1304
Joined: Thu Sep 06, 2012 7:41 am
Location: East Haven, CT

Re: Guide shoe installation

Postby HomeRacingWorld » Tue Jul 11, 2017 1:29 pm

90 is fine. Especially on the ovals.
-Harry

"They didn't say you couldn't" - Smokey

Image

Image
User avatar
HomeRacingWorld
HRW Janitor
 
Posts: 13329
Joined: Wed Aug 08, 2012 2:05 pm
Location: HRW Skunkworks


Return to The Marty Stanley Scratchbuilders Shop

Who is online

Users browsing this forum: No registered users and 5 guests