Strombecker 1/32 Chaparral 2D on Monogram brass chassis
Posted: Thu Oct 11, 2012 6:55 pmStrombecker made an excellent Chaparral 2D back in the sixties and EJ's makes some nice decals for these. I mounted one on an original Monogram brass chassis by utilizing the body mounts from one of the re-issued Monogram Chaparral 2 cars, these had to be cut-off of the interior tray. I used a black piece of poster board for the interior and mounted the Monogram driver. The driver was a tight fit and I had to trim the top of the drivers head, I even had to glue him to the roof of the body. I thought it came out rather well and it seems to sit just right... well maybe it could be lower in the back (or use taller tires).
