Home Racing World

Digging through my stuff the other day I realized I have a complete Monogram 1/32 frame but no motor. So, looking for the X-110 motor. That's the one with the clip that holds it to the back section of the chassis. Need the clip too.

Then all I'll need is a body!

Thanks,
Vince

Vince -
I have a couple random motors and clips in a lot that I got on auction - I am not familiar enough with the older Monogram Motors / clips to tell if any of these might be what you are looking for. Do you have a link to a picture etc that you could share?
:)

Monogram made a couple of chassis for sports cars. An aluminum plate style for home set cars, a brass ladder chassis with a drop arm (330 PLM for sure) and the 2 piece front/rear brass chassis like EJs Hobby sells.
There were some narrow F1 chassis as well.

I am a bit confused about the clip though...the Monogram chassis had front and rear plates to hold the motor instead of the clip.
Now, the COX magnesium chassis and the ISO fulcrum chassis both used a clip.....
A pic would be great.

FWIW....these x-110 motors show up on auction sites reasonably frequently.

Yes, a picture is worth a thousand words!

Left is chassis needing motor. Note big hole for bearing end of motor to be held in by a clip. Ferrari 330P/LM chassis with motor (Mabuchi type B, 500/F16D) I need, missing the clip. The clip I just found in the bottom of parts drawer I'll clip on later. Right is the other Monogram motor (Mabuchi type A, 500/F16D) which, I believe, would fit in the EJs chassis.

Mono MotorA.jpg

I have a friend here on Long Island with lots of vintage Monogram stuff.
If you're still searching, he may be able to help you out.
PM me for more info. -- Ernie :>)

How did you make out with the lead I gave you?
I'll be seeing him tonight at our monthly model car club meeting.
PM me, please. -- Ernie :>)