Revell Mono Vintage Nascar 67 Fairlane Chassis replacement

[JIMMYX3]

We run a class of Vintage Grand National by Revell Mono. Is there anything out there that would be a replacment for the obsolete chassis for it? So far I found some of the Pioneer chassis are close but their not always in available, Wondering what would be a fit. :doh: any help would be welcome.

Thanks
JIMMYX3

[Racie35]

I think professor sells replacements for those.

[Austin]

Here are some 3d chassis out there.

[VTECFOUR]

Consider building a metal chassis.

Mine's a simple ladder one with adjustable wheel base.





I like the modeling detail, so I kept most of the interior tray and driver figure
with a bit of cutting.





I just had the body, but I'll venture to say it runs better than the original.









It's one of my favorite builds.

Dan

[indidragracer]

https://www.shapeways.com/shops/rlsots

[munter]

I have a new (in bag) chassis kit if you need it.
Shipping will be $US10.00 because I am in New Zealand....plus the price of the chassis which is $15US.00
PM me if you want to know more.

Regards
John

[Fathead59]

Nice looking chassis , I just hope the chassises I plan on building are any where close to the ones I see here , will be using the same concept with the frames I plan on building for my 1/24 scale dragsters I will build

[Fathead59]

I planning on using square tubing also , but the inside one will be square also, figured it would make the frame a little stiffer, and since they will be drag cars I figured the stiffer the better ( that what she wanted ) get that comment out of the way.

[Fathead59]

And they do sell the chassis for those models, I am using them for the RMS resin bodies I have, I had to add extra mounding spots for them , but that wasn't as hard as I would have thought. The only thing I had to do was sand down the mounting spots on the chassis so they would fit level with the body.

[Fathead59]

I know where you can get a replacement chassis if you are still looking for it, go to Professer Motor web site , part number is PMTR8508, it is the correct chassis for the Monogram bodies also because I got two bodies from SCC, and the mounting holes line up perfectly. I hope that helps, and I am sorry , I should have known what you were talking about before.

[Fathead59]

The only thing you may need to get is the bar magnets that go with that chassis, whose you will have to buy separate

[Fathead59]

And Munter , I wasn't trying to keep you from selling the ones you have.

[Fathead59]

Just another thing about the Monogram chassis, and the mag nets, Professor Motor has the magnets also , part #pmtr1032, you will have to cut them down a little but they are the ones that come the closet to size.

[JIMMYX3]

Thanks Guys for all the replys

JIMMYX3